Embassy Flag,  South Carolina flag


SOUTH CAROLINA STATE FLAG
South Carolina flags, South Carolina flag lapel pins, South Carolina flag patch, South Carolina flag decal, South Carolina desktop flag
Order all South Carolina flag items from the pull down menu below or see Bulk Pricing.

South Carolina state flag
Order Menu

South Carolina state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
South Carolina indoor flag
South Carolina Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories

South Carolina boat flag
South Carolina boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
South Carolina desktop flag
South Carolina Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
South Carolina flag lapel pin
South Carolina state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
South Carolina friendship flag lapel pin
South Carolina / USA friendship flag lapel pin
(crossed flag lapel pin)
South Carolina state flag decal
South Carolina state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
South Carolina state flag patch
South Carolina state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
South Carolina flag decals
Miniature South Carolina flag decals
1" x 1.5" flag sticker packages - 60 per pack - self adhesive
.
coated paper product, moisture resistant, but not waterproof.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
South Carolina outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon South Carolina flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

South Carolina boat flags are nylon, 12”x18” size with 2 brass grommets.

South Carolina indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

South Carolina desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

South Carolina stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

South Carolina classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1861
The General Assembly adopted the current version of South Carolina’s flag on January 28, 1861. This version added the Palmetto tree to the original design by Colonel William Moultrie in 1775 for use by South Carolina troops during the Revolutionary War. Colonel Moultrie chose a blue color which matched the color of their uniforms and a crescent which reproduced the silver emblem worn on the front of their caps.The palmetto tree symbolized Colonel Moultrie's heroic defense of the palmetto-log fort on Sullivan's Island against the attack of the British fleet on June 28, 1776. (ref; scstatehouse.gov, Seals, Flags and Emblems)

South Carolina is one of the original thirteen colonies. More Revolutionary War battles and skirmishes were fought in South Carolina than any other state. South Carolina ratified the United States Constitution on May 23, 1788, becoming the eighth state to enter the union. (statelibrary.sc.gov, History)
HISTORIC SOUTH CAROLINA FLAGS

Ft. Moultrie / Liberty flag
Fort Moultrie flag
Cowpens Historic flag
Cowpens flag


About Embassy Flag
Embassy Flag copyright