Embassy Flag,  Oregon flag


OREGON STATE FLAG
Oregon flags, Oregon flag lapel pins, Oregon flag patch, Oregon flag decal, Oregon desktop flag
Order all Oregon flag items from the pull down menu below or see Bulk Pricing.

Oregon State FlagOregon flag reverse side image
Oregon flags have a beaver on ther reverse side.
ORDER MENU

Oregon state flags are USA made. Sizes over 2x3 ft are double sided.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.

Oregon indoor flag
Oregon Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
   
Oregon boat flag
Oregon boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Oregon desktop flag
Oregon Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Oregon flag lapel pin
Oregon state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Oregon friendship flag lapel pin
Oregon / USA friendship flag lapel pin
(crossed flag lapel pin)
Oregon state flag decal
Oregon state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Oregon state flag patch
Oregon state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Oregon outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Oregon outdoor flags larger than 2x3 ft are double sided.

Extra large outdoor nylon Oregon flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Oregon boat flags are nylon, 12”x18” size with 2 brass grommets.

Oregon indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). Indoor flags are USA made. Oregon indoor state flags are double sided.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Oregon desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Oregon stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Oregon state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1925. The Oregon state flag, adopted in 1925, is navy blue with gold lettering and symbols. Blue and gold are the state colors.

Oregon flag shield

On the flag’s face the legend “STATE OF OREGON” is written above a shield which is surrounded by 33 stars. Below the shield, which is the obverse portion of the state seal, is written “1859” the year of Oregon’s admission to the union as the 33rd state. The flag’s reverse side depicts a beaver. Oregon is the only state whose flag has a different pattern on the reverse side.

The shield depicts the mountains and forests of Oregon, an elk with branching antlers, a covered wagon and ox team, the Pacific Ocean with a setting sun, a departing British man-of-war ship (a symbol of the departure of British influence in the region) and an arriving American merchant ship (a symbol of the rise of American power). The 33 stars supporting the shield signify that Oregon was the 33rd state to join the Union.

Oregon Flag, Reverse Side, Beaver Image
Oregeon flag beaver

Acquired with the Louisiana Purchase of 1803 and explored by the Lewis and Clark Expedition of 1805-1806, the Orgeon frontier was formerly explored by the French, Spanish, Russian and British. The Oregon Territory was created in 1848 after the Oregon Treaty established the border between British North America and the United States. In 1853 the Washington Territory was carved out of the Oregon Territory. An Oregon consitutional convention was authorized in 1857 and Oregon was admitted to the Union in 1859 as the 33rd state. (ref; bluebook.state.or.us, Oregon History)



About Embassy Flag
Embassy Flag copyright