Embassy Flag,  Rainbow flag

Rainbow / LGBT Pride flags, desktop flags, bunting & fans, flag lapel pins
Order all Rainbow flag items from the pull down menu below.

Order Menu

Rainbow / LGBT Pride flags 12"x18" and larger are all USA made.
200 denier nylon, finished with heading and brass grommets.

Rainbow / LGBT Pride flag

Rainbow Boat Flag
12"x18" nylon, with heading & grommets, USA made

16"x24" nylon (allow 1 week)

Rainbow Pride boat flag

Rainbow Desktop Flag
4"x6" soft nylon, mounted on a 10" black staff
with golden spear point 

Rainbow tabletop flag

Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

Desktop flag stands

Rainbow / Pride Pleated Full Fan
3 ft x 6 ft nylon, USA nade
canvas heading with 3 grommets

Rainbow LGBT Pride Pleated Fans

Rainbow LGBT Pride flag lapel pin / friendship pin, crossed flags
Etched & Die Struck Enamel flag lapel pins on brass
3/4" - 1" (19 mm)

Rainbow Pride flag pin

Embassy Flag has supplied both the Market St. Parade Route Pride Flags for the San Francisco LGBT Pride Parade and the Castro / Upper Market street banners for local merchants (2013 & 2016). The pararde route rainbow flags were custom made for the SF LGBT Parade Committee, with fully stitched stripes, 6 ft x 10 ft nylon, and made in the USA. The street banners are also custom sewn in the USA.

Rainbow /LGBT Pride outdoor flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor rainbow / pride flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Rainbow boat flags for boating are nylon, available in 12”x18” and 16"x24" size with 2 brass grommets.

Rainbow indoor flags are available made to order in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Rainbow desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Rainbow stick flags, hand held mounted flags are available in 2 sizes:
4 x 6 inch on 10" black staffs with a red safety ball top
8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Made to order only, please call to order.

About Embassy Flag
Embassy Flag copyright