|
|
U.S.
NAVY FLAG
Navy
flags, Navy
flag lapel pins, Navy flag patch, Navy flag decal, Navy
desktop flags
Order US Navy flag items from the pull down menu
below
or see Bulk Pricing
 U.S. Navy flags are 200 denier nylon, USA made and finished with heading and brass grommets. |
 Navy Indoor Flag Nylon with pole hem and fringe |
 Navy boat flag, ensign, courtesy flag 12"x18" 200 denier nylon finished with heading and brass grommets. |
 Navy Desktop Flag 4"x6" soft nylon miniature flag mounted on a 10" black staff with golden spear point |
 Navy flag lapel pin Etched & Die Struck Enamel flag lapel pins on brass 1" (24 mm) |
 Navy premium lapel pin Polished brass with enamel 3/4" (19 mm) pin - $10.95 |
 Navy (Seal) decal 3.25" x 5" on vinyl stock w/ UV blocking inks. Non-permanent adhesive - waterproof, USA made. |
 Navy / USA friendship flag lapel pin (crossed flag lapel pin) |
 Navy Flag decal 3.25" x 5" on vinyl stock w/ UV blocking inks. Non-permanent adhesive - waterproof, USA made. |
 Navy flag patch 100% embroidered including trim, 2 1/4" x 3 1/2" Washable, sew-on, iron-on. |
 Miniature Navy flag decals 1" x 1.5" flag stickers - 60 per pack - self adhesive, USA made.. coated product, moisture resistant, but not waterproof. |
 Navy Shield Patch 100% embroidered including trim, 3" Washable, sew-on, iron-on. |
 Desktop Flag Stands / Bases - for 4"x6" desktop flags # 1-7 hole black plastic, #10 & 12 hole wood |
|
Outdoor U.S. Navy flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor military flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Larger sizes are available made to order. US Navy boat flags are nylon, 12”x18” size with 2 brass grommets. Indoor U.S. Navy flags are stocked in 3x5 ft (4x6 ft. nylon size is made to order) and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood, light ash guidon staffs, and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes. U.S. Navy desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags. U.S. Navy stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. packaged in quantities of 12/box. |
|
